| Silicone screen print on hard adhesive fabric | Description | ITEM |
| 1.Step 1: Use base adhesive silicone AD-9, mix with catalyst at 100:2. Print two times, bake after every printing. | Base Adhesive silicone | AD-9 |
| Catalyst | AD-9 CA | |
| 2.Step2: Print middle layer silicone 2301B(TZ),add catalyst #100 about 5%,bake after every printing. | middle layer | AS -2301B(TZ) |
| Catalyst | XGY-100 | |
| 3.Step 3: Print hard silicone as base coating, Mix hard silicone 2301AH with catalyst at 10:1,print 6-8 times depend on the thickness you need. Add thinner when the silicone density is very high,normally add below 10%. Bake after printing. | Base coating silicone | AS-2301AH |
| Catalyst | XGY-5 | |
| 4.Step4: Print the color coating silicone, mix silicone ink 3302A with catalyst at 10:1, add pigment about 15%, stir well. Print 2-8 times depend on your fabric color. Bake every printing. | Color coating | AS-3302A |
| pigment | pigment | |
| Catalyst | XGY-5 | |
| 5.Step 5: Surface coating. Print the glossy surface coating silicone 3303A, mix with catalyst at 10:1. Print 1-2 times ,Wait some minutes ,we can’t bake it until the silicone flow well,no bubble. | Glossy surface coating (depend on your request) | AS-3303A |
| Catalyst | XGY-5 | |
| THINNER | P-2 | |